Toge TSM Screw Bolt – Hex Head

Product Code

Description

Toge Dubel is one of the leading innovative screw manufacturers in the world, specialising in concrete screw anchor technology. Screw anchors give a positive connection that is free of expansion pressure in most base materials lending them great close-to-edge fixing characteristics. Available in zinc and stainless steel, various head styles and configurations with fire rating, seismic approval (C1) (only applicable to sizes greater than 6mm diameter) and ETA cracked concrete approval. The Toge TSM range features quick and safe installation, high load capacities in both cracked and non-cracked concrete with undercut load transmission. The TSM can be easily removed and does not leave residue or metal components in the drilled hole that can cause corrosion. Loads can be achieved immediately upon installation

Features
• National Code Compliant (NCC)
• ETA Approved
• Cracked Concrete Approval
• Seismic C1 Approval (only applicable to sizes greater than 6mm diameter)
• Fire Rated
• CE Certification
• High load performance
• Suitable for overhead applications
• Removable
• Available in Hex, countersunk and pan head variations
• Available in Zinc clear and 316 stainless steel variants
• Ideal for close-to-edge applications due to minimal expansion force

Applications
• Ideal for safety critical and seismic applications such as hospitals, schools and data centres
• Concrete
• Brick
• Block
• Marble
• Stone

  • Use the correct diameter drill bit
  • Drill a hole to the required anchor embedment depth, plus at least one anchor diameter deeper
  • DO NOT use a worn drill bit outside tolerance specification
  • Ensure the hole is drilled perpendicular to the concrete, with a maximum deviation up to 5 degrees. Failure to do so may cause anchor breakage
  • Clean dust and other materials from the hole. Use ICCONS Blow Pump for a perfect result
  • Use a torque wrench or an impact driver
  • Ensure correct clearance hole in the fixture
  • Apply pressure against the fixing
  • Rotate to engage the first thread
  • Tighten the anchor until it is firmly seated
  • When using an impact driver DO NOT overtighten! Follow the torque guidance table, failure to comply may result in anchor breakage. Refer to ICCONS TDS for further information
Downloads
Toge TSM TDS.pdf Download
NCC Range Poster.pdf Download
Building Services Document 2020.pdf Download
AS2785-2020 Suspended Ceiling Update.pdf Download

Related products