Thunderbolt Pro-XTM – Hex Head

Product Code

Description

ICCONS Thunderbolt Pro-XTM Hex Head is the latest approved high tensile screw-in, self-tapping concrete and masonry anchor for use in a wide range of materials used in the construction Industry. Installation is quick and easy, simply drill, clean the hole and screw in the anchor. If you are after the best general purpose Screw Bolt in the business, ICCONS Thunderbolt Pro-XTM Hex Head is your anchor.

ICCONS Thunderbolt Pro-XTM achieves the Highest Loads while generating low expansion forces. The Thunderbolt Pro-XTM is also completely removable making it ideal for temporary applications. Unlike mechanical expansion anchors, the Thunderbolt Pro-XTM keys into the base material for the entire depth and diameter of the hole, not just at the base of the hole. This reduces high energy forces within the concrete allowing close anchor spacing and near-to edge anchor locations. Sharp thread forming teeth ensure the most secure connection in hard base materials. The Thunderbolt Pro-XTM is a truly versatile anchor, as it can be installed in a whole range of base materials such as concrete, block, brick, timber, marble, and stone, just to name a few. The highly engineered design of ICCONS Thunderbolt Pro-XTM is the result of extensive testing and provides market leading load performance. ICCONS Thunderbolt Pro-XTM is a one piece, fast, efficient and cost effective fixing solution for any job.

Features
• Available in Zinc Plated Carbon Steel, Galvanised Carbon Steel or Bi-metal Stainless Steel 316 A4
• Perfect for internal or external applications
• Fast installation at reduced torque
• Removable
• Stamped Hex Head for fast and accurate identification
• Flanged Hex head locking serrations designed to resist loosening and improve dynamic load performance
• Chamfered tip centres anchor and aids in installation
• Designed for cracked and non-cracked concrete
• No expansion, ideal for close-to-edge applications
• Complies with AS5216:2018 (Design of post-installed and cast-in fastenings in concrete – refer to select range)

Applications
• Concrete
• Brick
• Block
• Timber
• Marble
• Stone

  • Use the correct diameter drill bit
  • Drill a hole to the required anchor embedment depth, plus at least one anchor diameter deeper
  • DO NOT use a worn drill bit outside tolerance specification
  • Ensure the hole is drilled perpendicular to the concrete, with a maximum deviation up to 5 degrees. Failure to do so may cause anchor breakage
  • Clean dust and other materials from the hole. Use ICCONS Blow Pump for a perfect result
  • Use a torque wrench or an impact driver
  • Ensure correct clearance hole in the fixture
  • Apply pressure against the fixing
  • Rotate to engage the first thread
  • Tighten the anchor until it is firmly seated
  • When using an impact driver DO NOT overtighten! Follow the torque guidance table, failure to comply may result in anchor breakage. Refer to ICCONS TDS for further information
Downloads
Thunderbolt Pro XTM TDS.pdf Download
NCC FAQ.pdf Download
Building Services Document 2020.pdf Download